Beam saw support
CNC file export for 13+ beam saw models across 8 vendors — core formats validated end-to-end against real saw hardware.
From calculation to CNC file
SmartCut's post-processor pipeline converts an optimised cutting layout directly into the CNC format your saw expects — no manual transcription, no intermediate software.
Every format is validated against the saw's own control software and, where possible, against real saw hardware — checked for geometric accuracy across a library of real production jobs before it ships to your machine.
Supported saws
| Saw / software | Vendor | Format | Status |
|---|---|---|---|
| Holzma / Sawteq | Homag | PTX | Validated |
| Homag CPOUT | Homag | CPOUT | Beta |
| CADmatic 3 / 4 / 5 | Homag | .saw (PTN3) | Beta |
| Optiplanner (Beam saw) | Biesse | Biesse XML (Str) | Validated |
| Selco WN series | Biesse | Biesse XML (Str) | Validated |
| PC5100 / PC7000 | Mayer | .may | Validated |
| Pratika | SCM | Biesse XML (Str) | Beta |
| SCM Link | SCM | .900 | Beta |
| Commander 4 (MCS) | Schelling | .nc | Beta |
| Commander 2 | Schelling | .002 | Beta |
| G-Drive | Giben | .ac | Beta |
| Vertical panel saw (IST PIOS) | Striebig | CSV (ZuschnittOpti) | Beta |
| Jingwei (CNC cutting table) | Jingwei | CNC XML | Active use |
Validated — end-to-end CNC file in production, accepted by the saw's own software on a full job corpus. Active use — in production with live customer traffic. Beta — format implemented and tested; real-machine sign-off in progress.
Vendor details
Homag
PTX Validated end-to-end on the full production corpus. PTX round-trips head cuts and mixed-rotation layouts.
- Sawteq B-130/160/300/320 (4300 × 2250 mm bed)
CPOUT CPOUT cut-sequence export for Homag panel saws.
.saw (PTN3) PTN3 format for Homag CADmatic controllers.
Biesse
Biesse XML (Str) Verified on 15 Selco WN6/WN7 saw configurations.
- WN6XX 3200 mm
- WN6XX 3800 × 3200 mm
- WN6XX 4500 mm
- WN6XX 5900 mm
- WN6XX/WN7XX 3800 mm
- WN6XX/WN7XX 4500 mm
- WN6XX/WN7XX 5900 mm
- WN6XX TP 3200 mm
- WN6XX TP 3800 mm
- WN6XX TP 4500 mm
- WN7XX 3800 mm
- WN7XX 4500 mm
- WN7XX 5900 mm
Biesse XML (Str) Uses the same Biesse XML output as Optiplanner, with Selco-specific defaults.
Mayer
.may Validated end-to-end against Mayer PC5100 reference files. Bed envelope: 4500 × 2200 mm.
SCM
Biesse XML (Str) Uses the validated Biesse XML output with SCM-specific defaults (4.8 mm kerf).
.900 Positional record format for SCM saw-link software.
Schelling
.nc .nc output for Schelling Commander 4 (MCS) saws.
.002 Output for older Schelling Commander 2 saws.
Giben
.ac .ac output for Giben G-Drive saws.
Striebig
CSV (ZuschnittOpti) IST PIOS CSV import for Striebig vertical saws. Cut length ≤ 9800 mm, board height ≤ 2100 mm.
Jingwei
CNC XML Continuous-roll contour cutter for roll-stock and sheet materials. In active customer use.
Missing a saw?
New saw formats are added through a structured validation process. If you need a format that isn't listed, get in touch — we may already have a prototype, or we can scope a format development project.
Contact usSaw support FAQ
Which beam saws does SmartCut support?
SmartCut exports CNC files for 13+ beam saw models across eight vendors — Homag (PTX, CADmatic and CPOUT), Biesse Optiplanner and Selco, Mayer, SCM, Schelling Commander, Giben, Striebig and Jingwei.
What file format does my saw need?
It depends on the machine — Homag uses PTX, Biesse and SCM use Biesse XML, Mayer uses .may and Schelling uses .nc. SmartCut emits the right format automatically from the optimised layout; the table above lists the format for each model.
Can I request support for a saw that is not listed?
Yes. New formats are added through a structured validation process. Get in touch — we may already have a prototype, or we can scope a format development project.
Are the CNC files validated?
Yes. Each format is validated against the saw's own control software, with geometry and accuracy checks across a library of real production jobs before it ships to a machine.